Cute Cement Stepping Stone


All you do is mix the cement with 3 cups of water and stir it up.  Then, pour it into the mold from you kit and wait about 30 minutes.  Then you can decorate with the rocks, letter prints, or anything you want.



First, after you have let it sit for 30 minutes, if you can see water pooled on the top you need to soak it up with a paper towel and wait another 15 minutes before trying to make a mold of your hand or anything else.  If you dont wait, the hand print will fill with the water and you will have to make your print all over again.


Second, don’t put your stone in the sun to dry.  Leave it somewhere it can sit for at least 48hrs at room temperature.  You want it to dry slowly.  If it dries too fast it will crack.

Finally, once it is done and has dried for at least 48 hrs you can clean it off (I used an old toothbrush to polish it up) and take it out of its mold.




 
Idees And Solutions © 2015 - Designed by Templateism.com